|
|
Steel structure of sport hall
Ceh, Ondřej ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
This thesis contains a design of steel structure of a sport hall placed in the city of Zábřeh na Moravě. The ground dimensions are 29 x 62,5 m, height is 10 m. The steel structure of a roof is based on frames with a span of 29 m and purlins from open cold rolled profiles. A structural material of frames is steel S355 grade, a structural material of purlins is S450 grade. A bolted connection of the frame will be done according to the maximal rigidity and feasibility of the structure.
|
|
|
Industrial Hall with Administrative Building
Ceh, Ondřej ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
This thesis contains a design of a steel structure of two-bay industrial hall with an administrative facility in the city of Brno. There are 3 variants of solution for industrial steel hall with duopitch roof with overall dimensions 60x74 m and detailed structural analysis of the first variant. Height of the hall is 10,5 m. Main structure of the roof is designed as frames from steel profiles with purlins from cold rolled sections, a span of frames is 30 m. The material of main frames is steel S355, material of purlins is S450. The hall is equipped by overhead crane with loading capacity 5 tons. Bolted connections will be done with maximal stiffness and feasibility of the structure. The administrative facility is designed as an independent building with 3 floors, the floor plan is semicircular with diameter 48 m.
|
|
|
The footbridge for pedestrians and cyclists in Loštice
Sochorec, Michal ; Bajer, Miroslav (referee) ; Šmak, Milan (advisor)
The Diploma thesis deals with design and static assessment of timber footbridge structural system for pedestrians and cyclist across the Trebuvka river in Lostice on the site of the existing footbridge. Structural system is designed in two alternatives and assessed according to the current standards. Spans of the bridge are 2x18 m and 1x6 m. The main beams are made of glued laminated timber, other parts of the structure are made of timber and steel elements. First alternative is designed as a simple half-through truss beam, second alternative as continuous beam with variable height where the deck is sitting on top of the girders.
|
|
|
The Roofing of Terraces of a Stadium
Bartoň, Radek ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to propose and consider steel structure of roofing of a terraces on an athletic stadium. Terraces, with the ground-plan dimensions 12,0 x 80,0 m, are designed as a reinforced concrete structure and its structural analysis is not included in this thesis. Construction is situated in area of Rožnov pod Radhoštěm, which meant, It had to be accounted with considerable variable loads (wind, snow), which is associated with enlargement of a cross-sections. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
Trade and Exibition hall
Erban, Jakub ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The Master´s thesis is focused on the design and structural analysis of the hall serving for businnes and exhibitons purposes that is strained by the permanent load, climatic and operational load. The construction is located in the area Opava. The hall is designed as intersection of two domes. The diametr of smaller one is 38,0 m and diametr of bigger one is 50,0 m. Maximum high of the construction reach 15,150 m. The main carrier elements of the structure are beams made from glued laminated timber, class GL24h.
|
|
|
Prestressed double tee bridge
Ondrušek, Martin ; Kulhavý,, Tomáš (referee) ; Koláček, Jan (advisor)
The subject of the master thesis is a prestressed double girder bridge with four spans. The bridge carries the D1 motorway over the Olše river and a crossing ramp. The structure is modelled in Scia Engineer and then assessed according to the standards for ultimate and serviceability limit states.
|
|
|
Single span pedestrian bridge
Rataj, Tomáš ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
The subject of the bachelor's thesis is the design of a single-span footbridge. Within the thesis, two variants were proposed and compared, and a simply supported pre-stressed structure was selected. This particular variant was further analyzed and evaluated for ultimate limit state and serviceability limit state. The calculations were performed using the SCIA Engineer and MS Excel software, supplemented with manual calculations. The calculation procedure followed applicable standards and regulations.
|
|
|
Prestressed double tee bridge
Ondrušek, Martin ; Kulhavý,, Tomáš (referee) ; Koláček, Jan (advisor)
The subject of the master thesis is a prestressed double girder bridge with four spans. The bridge carries the D1 motorway over the Olše river and a crossing ramp. The structure is modelled in Scia Engineer and then assessed according to the standards for ultimate and serviceability limit states.
|
|
|
Industrial Hall with Administrative Building
Ceh, Ondřej ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
This thesis contains a design of a steel structure of two-bay industrial hall with an administrative facility in the city of Brno. There are 3 variants of solution for industrial steel hall with duopitch roof with overall dimensions 60x74 m and detailed structural analysis of the first variant. Height of the hall is 10,5 m. Main structure of the roof is designed as frames from steel profiles with purlins from cold rolled sections, a span of frames is 30 m. The material of main frames is steel S355, material of purlins is S450. The hall is equipped by overhead crane with loading capacity 5 tons. Bolted connections will be done with maximal stiffness and feasibility of the structure. The administrative facility is designed as an independent building with 3 floors, the floor plan is semicircular with diameter 48 m.
|
guest ::
